Regularly check the lubricating oil condition of each component, and replace or add lubricating oil as needed, gearbox, various bearing parts, reducer, etc.
Regularly check the wear condition of each component, gear wear, spindle coupling transmission mechanism wear, barrel wear, screw wear, etc., and replace severely worn parts in time.
The electrical system needs to be equipped with protective devices, such as grounding protection, overload protection, insulation protection, etc., and maintained by professionals. Regularly check and clean the dust in the operation box and control cabinet, and promptly check the inverter, electrical fasteners, etc. If a tripping protection occurs, it is necessary to troubleshoot the problem before starting.
The equipment should be cleaned inside and outside after each shift. The barrel and screw should be cleaned with water in time after each shutdown to prevent the material from cooling and agglomerating, which is difficult to clean. If the equipment needs to be shut down for a long time, turn off the main power and pull out the screw for cleaning. Clean the residual material on the surface of the equipment to prevent the residue from agglomerating and mildewing and causing pollution.
