Chemical microwave dryers are mainly used for: sodium chloride, copper oxide, nickel hydroxide, tungsten oxide, strontium phosphate, sodium pyroantimonate, cobalt oxalate, lithium cobaltate, light calcium carbonate, activated calcium carbonate, nano-scale ultrafine calcium carbonate, magnesium carbonate, strontium carbonate, barium carbonate, potassium carbonate, potassium sulfate, microsphere catalyst, copper sulfate, nickel sulfate, nickel acid amine, sodium molybdate, red iron oxide, lithium hydroxide, zirconium hydroxide, calcium phosphate, sulfur and other chemical raw materials.
Advantages of microwave drying machine for drying chemicals:
1. Short time and high efficiency.
Microwave chemical raw material drying equipment can meet the drying needs of different chemical products. Whether the material is to remove free water or crystal water, microwave drying equipment can be used for low-temperature rapid drying.
Microwave heating can achieve rapid heating, thereby shortening the drying time of chemical products. Compared with traditional hot air or conduction heating methods, microwaves can transfer energy to the inside of the material more directly, improving heating efficiency. The moisture content of the final product after microwave drying can be less than 1%.
2.Environmentally friendly, no pollution-free, no dust
Compared with other drying methods, microwave dryer do not produce dust during the drying process of materials, and are a safe and harmless high-tech.
3. Customized
Equipment can be customized according to the characteristics of the raw materials to extend the service life of the equipment. For example: whether it is corrosive, whether corrosive gases are produced, etc.
The size and power of the equipment can be customized according to the customer's workshop and capacity.
It can be customized according to the degree of material absorption, whether to add infrared heating sections, etc.
4. Selective heating, material does not agglomerate
Because water molecules absorb microwaves best, the part with high water content absorbs more microwave power than the part with low water content. This is the characteristic of selective heating. Using this characteristic, uniform heating and uniform drying can be achieved without agglomeration and hardening.
5. Simple operation and easy control
PLC control, high degree of automation, assembly line production, adjustable microwave power, adjustable transmission speed.
